White Rabbit Decal

Currently available in WHITE only.

This says "MAGIC"!

Easy to apply vinyl sticker in the shape of a rabbit!

Place this sticker on a car window, your laptop, or even on a piece of magic equipment!

Though it does not come with application instructions, this is very easy to apply.
What you have is a vinyl decal sandwiched between a white backing paper and a clear backing paper.
The sticky side of the decal is stuck to the white backing paper.
The entire surface of the clear paper is sticky, so it can hold the decal and be positioned on your item.

1. First, make sure the surface you will be applying this to is CLEAN, DRY and SMOOTH.
2. Next, separate the decal from the white backing paper.
   Just start at one edge, and slowly pull the white paper back off of the decal (which is still attached to the clear paper).
   Be very careful and do this slowly so you don't tear the decal!
   The vinyl decal is sticky on the side that is next to the white paper.
   You want to expose that sticky side.
   At this point, DO NOT peel the decal from the clear backing!
   When you are done with this step, you will have the white paper completely off the decal that's on the clear paper.
3. Now lay the sticky side of the decal onto the surface you want to adhere it to.
4. Rub the decal down evenly to make it stick.
   Because the clear paper is still over the decal, this step is easy.
5. When the decal looks fully adhered, CAREFULLY peel off the clear sheet.
   You will be peeling off the clear sheet, leaving the vinyl decal still stuck to your surface.
   And that's what you want!